Parameter name Default
value
Description
• [;transport=xxx] is the
transport type and xxx is either
TLS or TCP. The default value is
TLS.
For example,
SIP_CONTROLLER_LIST_2="10.
16.26.88:5060;transport=tc
p"
SIPCONFERENCECONTINUE 0 Specifies if a conference call
continues after the host hangs up.
Value Operation:
• 0: Drop all parties.
• 1: Continue conference
Note:
This parameter is set to 1 in IP
Office environment.
SIPDOMAIN Null Specifies the domain name to be
used during SIP registration.
The value can contain 0 to 255
characters. The default value is
null.
SIPPORT 5060 Specifies the port the phone opens
to receive SIP signaling messages.
Valid values are 1024 through
65535. The default value is 5060.
SIPREGPROXYPOLICY Simultaneo
us
Specifies if the phone attempts to
maintain one or multiple
simultaneous registrations.
Value Operation:
• Alternate: Only a single
registration is attempted and
maintained.
• Simultaneous: Simultaneous
registrations is attempted and
maintained with all available
controllers.
SKILLSCREENTIME 5 Specifies the duration, in seconds,
that the Skills screen is displayed.
Table continues…
Appendix
December 2018 Installing and Administering Avaya J100 Series IP Phones 260
Comments on this document? infodev@avaya.com
To Next Page
Loading...
