MAPD-BD (MAPD Interface Circuit Pack TN802)
Issue 1 May 2002
8-735555-233-142
System Technician-Demanded Tests:
Descriptions and Error Codes
Investigate tests in the order they are presented in Table 8-301. For example, by
clearing error codes associated with the NPE Connection Audit test (#50), you
may also clear errors generated from other tests in the testing sequence.
Table 8-301. System Technician-Demanded Tests
Order of Investigation
Apply to
TN802?
1
1. N = No; this test either passes or ABORTS with Error Code 2000 (problem with NT)
Short
Tes t
Sequence
Long Test
Sequence
Reset
Board
Sequence D/ND
2
2. D = Destructive; ND = Nondestructive
NPE Connection Audit test (#50) Y X ND
Control Channel Loop test (#52) Y X ND
Loss of Signal Alarm Inquiry test
(#138)
NXX ND
Blue Alarm Inquiry test (#139) N X X ND
Red Alarm Inquiry test (#140) N X X ND
Yellow Alarm Inquiry test (#141) N X X ND
Major Alarm Inquiry test (#142) N X X ND
Minor Alarm Inquiry test (#143) N X X ND
Slip Alarm Inquiry test (#144) N X X ND
Misframe Alarm Inquiry test (#145) N X X ND
Translation Update test (#146) N X X ND
SAKI Sanity test (#53) Y X D
Continued on next page
To Next Page
Loading...
