Maintenance Object Repair Procedure
555-233-142
8-1096 Issue 1 May 2002
PASS No Slip alarm is detected on the DS1 Interface circuit pack.
0NO
BOARD
The DS1 Interface circuit pack is not administered.
1. Administer the DS1 Interface circuit pack by issuing the add ds1 UUCSS
command.
2. Run the test again.
3. If the test continues to return NO BOARD, escalate the problem.
Table 8-470. Test #1244 Slip Alarm Inquiry Test — Continued
Error
Code
Tes t
Result Description / Recommendation
Continued on next page
To Next Page
Loading...
