Field
Name
Description
Important:
To reset the number of monitors to the default <auto > setting, press layouts and then 0
on the XT Remote Control Unit when XT is not in a call. The system then automatically
detects the number of connected monitors.
If your monitor crops the edges of the image shown in their displays, adjust it as described in
Resolving Monitor Display Problems on page 235.
Resolution
HD1/HD2
Defines the resolution of the connected main monitor (HD1 ) and auxiliary monitor (HD2
).
• <auto> sets the resolution and frame rate depending on the XT Series system and location and
monitor capabilities.
• 1080p forces 1080p resolution at 25, 30, 50 or 60 frames per second (fps) even if the monitor
does not support it.
A license may be required for this option.
• 720p forces 720p resolution at 50 or 60fps even if the monitor does not support it.
• 480p60 forces 480p resolution at 60fps even if the monitor does not support it.
• 1280x1024p60 forces 1280x1024 resolution at 60fps, with an aspect ratio of 5:4.
• 1400x1050p60 forces 1400x1050 resolution at 60fps, with an aspect ratio of 4:3.
You can preserve the aspect ratio of the presentation and video by setting Keep Aspect Ratio to
Yes. For more information about this setting, see Avaya Scopia
®
XT Series User Guide.
Duplicate
to HD2
Select Yes if you have two monitors and you want the monitor connected to HD2 to display
the same as HD1 but without system menus.
Monitor
Turn Off
Select Never if you do not want to turn off monitor.
Select Only on shut down if you want the monitor turned off only when system is turned off,
Select On screen saver if you want the monitor turned off when system is on screen saver or
turned off.
This feature works only with monitors that support CEC over HDMI
Screen
saver time
out
Select the time period after the screen saver appears after which you want the monitor to switch
off. This feature works only with monitors that support CEC over HDMI.
4. From the web interface only, select Save.
5. Configure the video layout. Select Monitor > PIP-PaP-PoP.
Initial Configuration of the XT Series
January 2017 Avaya Scopia
®
XT Series Deployment Guide 114
Comments on this document? infodev@avaya.com
To Next Page
Loading...
