2. Set the time limit for point-to-point calls.
a. Access call settings. From the XT Series web interface, select, select Administrator
Settings > Calls > Preferences > General. From the endpoint's main menu,
selectConfigure > Advanced > Calls > General.
b. Define the time limit for point-to-point calls in the Call Time Limit field. By default, the
time limit is Unlimited. The maximum limit you can set is 24 hours.
From the endpoint interface
From the web interface
Figure 96: General Settings
Related links
Advanced Configuration of the XT Series on page 128
Configuring Advanced Sound (Audio Output) Settings
About this task
In most cases, the Avaya Scopia
®
XT Series sound output is transparent and works with the default
settings. However, for complex room setups, the XT Series allows you to carefully merge different
audio signals into audio tracks, and then route each track to any audio output, like a monitor's
speakers. Merging all inputs and outputs into one sound stream, or track, creates echos and audio
feedback loops.
Configuring Advanced Sound (Audio Output) Settings
January 2017 Avaya Scopia
®
XT Series Deployment Guide 149
Comments on this document? infodev@avaya.com
To Next Page
Loading...
