Avaya Scopia XT7000 Series - Setting the Default Camera Position; Configuring Gallery Layouts

Setting the Default Camera Position
About this task
You can make any of your preset positions the default position. Each time the system reboots, the
XT Remote Control Unit selects the default camera and positions the camera to the specified preset.
Before you begin
Before you assign a camera position as the default, you must save a camera position, as described
in Saving PTZ Camera Positions on page 171.
Procedure
1. From the XT Series web interface, select More Actions located just under the tabs, then
select Control Camera
Figure 115: Control Camera
2. Select a default camera by clicking the Select button associated with that camera.
Figure 116: Setting Default
Related links
Advanced Configuration of the XT Series on page 128
Configuring Gallery Layouts
Gallery layouts is a feature which allows the user to have a better video layout when someone is
presenting, especially when they are using one monitor. When a videoconference is hosted by the
Avaya Equinox Media Server, users with XT Series endpoints can receive and change the gallery
layout.
Setting the Default Camera Position
January 2017 Avaya Scopia
®
XT Series Deployment Guide 173
Comments on this document? infodev@avaya.com