About this task
You can configure whether the XT Series endpoint uses gallery layouts when someone starts
presenting in a videoconference that supports gallery layouts.
If XT Series is receiving web collaboration in the meeting, this option is not applied.
Procedure
1. Access the gallery layout settings. From the XT Series web interface, select Administrator
Settings > Presentation > General. From the endpoint's main menu, select Configure >
Advanced > Presentation.
Figure 117: Configuring Gallery Layout (from the endpoint interface)
2. Define the Gallery Layout field.
Table 50: Configuring gallery layouts
Field Name Description
Gallery Layout
(Ignored when
receiving web
collaboration)
• Automatic: The display depends on the number of monitors that are
connected when the XT Series joins the meeting. If one monitor is
connected, XT Series displays gallery layout. If two monitors are
connected, XT Series displays the participants on one screen and the
presentation on the other screen. This is the default value.
• Always: The display is always gallery layout.
• Never: The display is never gallery layout.
Hide Presentation
Icon
This Hide Presentation icon is only for XT Executive with Avaya Scopia
®
XT Control.
If you are using Avaya Scopia
®
XT Control with your XT Executive, you can
move the Sent Presentation icon to another part of the screen by
dragging it with your mouse. You can also configure to hide the icon.
• Yes: Hide the Sent Presentation icon.
• No: Display the Sent Presentation icon.
3. From the web interface only, click Save.
Related links
Advanced Configuration of the XT Series on page 128
Advanced Configuration of the XT Series
January 2017 Avaya Scopia
®
XT Series Deployment Guide 174
Comments on this document? infodev@avaya.com
To Next Page
Loading...
