Related links
Troubleshooting the Avaya Scopia
®
XT Series on page 220
Restoring Default User Settings
About this task
This procedure explains how to restore the default settings if necessary. You can do this from the
endpoint itself only.
Before you begin
If configuring from the endpoint, you must first enable advanced configuration, as described in
Enabling Advanced Maintenance on the XT Series on page 129.
Procedure
1. From the endpoint's main menu, select Configure > Advanced > Utilities > Restore
System > Factory Defaults.
Figure 195: Restoring factory default settings
2. Confirm you want to remove all configurations.
The default settings are restored.
Related links
Troubleshooting the Avaya Scopia
®
XT Series on page 220
Resolving Screen Link Resolution Problems
Condition
I cannot change the screen resolution.
Cause
In this Scopia Desktop Client, you cannot change the screen resolution while Screen Link is active.
Restoring Default User Settings
January 2017 Avaya Scopia
®
XT Series Deployment Guide 253
Comments on this document? infodev@avaya.com
To Next Page
Loading...
