Configuring Remember Favorite Layouts
About this task
You can configure the XT Series to change the default display to your preferred display according to
the number of available video flows and your Multi Image preferences. The available video flows
are local video, remote video, local or remote presentation. The available Multi Image Type
preferences are Picture-In-Picture (PIP), Picture-and-Picture (PAP), and Picture-on-Picture (POP).
For example, when Multi Image Mode is set to Auto and Multi Image Type is set to Auto, in a
single monitor configuration, the codec unit displays the following display when there is no
presentation (remote video in a big window and local video in a smaller window).
Figure 120: Default Layout in a Call with No Presentation
The codec unit displays the following display if there is a presentation (local or remote presentation
in a big window and remote video in a smaller window).
Figure 121: Default Layout in a Call with Presentation
You may want to change the default display using your remote control or the Layouts menu. You
can choose to hide the remote video so that you see only the presentation.
Figure 122: Changed Layout Option 1
Configuring Remember Favorite Layouts
January 2017 Avaya Scopia
®
XT Series Deployment Guide 177
Comments on this document? infodev@avaya.com
To Next Page
Loading...
