Alternatively, you can choose to hide the presentation and see only the video.
Figure 123: Changed Layout Option 2
Unless your configure Remember Favorite Layouts, the next time that you switch on the XT
Series, it reverts to the default display.
Before you begin
If configuring from the endpoint, you must first enable advanced configuration, as described in
Enabling Advanced Maintenance on the XT Series on page 129.
Procedure
1. Access the customization settings. From the XT Series web interface, select Administrator
Settings > System > Customization > General. From the endpoint's main menu, select
Configure > Advanced > System > Customization > General.
Figure 124: Customization — General
2. From the Remember Favorite Layout menu, choose from the following options:
• Select Never to always revert to the default layout. It is enabled by default.
• Select In a call to ensure that the codec unit uses the last layout used in the same call for
that combination of video flows. This means that the next time you receive a presentation
in the same call, you automatically see the last layout you chose (your favorite one).
• Select Always to ensure that the codec unit uses the last layout used for that combination
of video flows. This means that the next time you receive a presentation in the same call
Advanced Configuration of the XT Series
January 2017 Avaya Scopia
®
XT Series Deployment Guide 178
Comments on this document? infodev@avaya.com
To Next Page
Loading...
