• Use the H.323 name if this XT Series is registered to a gatekeeper. This is the same as the
System Name, unless you change it manually as described in Configuring Advanced
Gatekeeper Settings on page 141.
• Use the hostname, which is the same as the system name, but some characters like a space in
the name are replaced by a hyphen.
Before you begin
If configuring from the endpoint, you must first enable advanced configuration, as described in
Enabling Advanced Maintenance on the XT Series on page 129.
Procedure
1. Access the system name settings. From the XT Series web interface, select Administrator
Settings > System > Location. From the endpoint's main menu, select Configure >
Advanced > System > Location.
Figure 84: Selecting the system name
2. Enter the following settings:
Table 30: Setting the display name
Field Description
System Name Display
Mode
Select the criterion for the system to display its name:
• Select Automatic to automatically choose the name based on deployment, first
displaying the SIP username if registered to a SIP registrar or proxy, and if
unavailable, it displays the H.323 name if registered to a gatekeeper, and if
unavailable it displays the unicode name.
Table continues…
Configuring Advanced System Name Settings
January 2017 Avaya Scopia
®
XT Series Deployment Guide 131
Comments on this document? infodev@avaya.com
To Next Page
Loading...
