Avaya Scopia XT7000 Series

To Next Page

To Previous Page

Field Name Description

Type Select the type of LDAP server you are configuring:

• Remote H.350 (Avaya Scopia

XT Series) refers to the built-in LDAP server of a different

XT Series. You can only view and call these contacts from this endpoint.

• Equinox Management (and Cloud) refers to Equinox Management's built-in LDAP server.

You can only view and call these contacts from this endpoint.

• Remote H.350 (generic) refers to a generic LDAP server, such as Microsoft Active Directory.

You can only view and call these contacts from this endpoint.

• Remote H.350 (third party) refers to a third-party LDAP server to support other

videocommunication vendors' directories, such as Polycom CMA.

Address Enter the LDAP server address. If you are using Equinox Management as your LDAP directory,

enter Equinox Management's IP address. If you are using Equinox Management as Cloud, the

address and the port are automatically configured.

Port Enter the port used to connect to the LDAP server. The default port is 389.

User Enter the username and password required to access the LDAP server. The format of the

username is in the form of a Distinguished Name (DN). Some standard components of DN are:

domain controller (dc), organizational unit (ou), common name (cn), country (c), state or

province (st), locality (l), organization (o).

The login to third party LDAP servers is via a Simple Bind LDAP v3 operation.

When using the endpoint's local built-in LDAP server, you can modify the password here.

Password

Base Enter the root node of the LDAP tree under which all the contacts (inetOrgPerson entities) are

defined. For example ou=people.

This value is predefined when the LDAP server is an XT Series or Equinox Management, and

cannot be modified.

Root DN For third party LDAP servers, enter the mandatory H.350 Root DN.

For a Equinox Management LDAP directory, if you defined the Root DN in Equinox

Management, enter it here. For details, see the Administrator Guide for Avaya Equinox

Management.

For XT Series LDAPs, this field is not displayed.

Filter The filter applied to the LDAP tree, so you view only the relevant contacts. This value is

predefined when the LDAP server is an XT Series or Equinox Management.

4. From the web interface only, select Save.

Avaya Scopia XT7000 Series - Page 162