Field Description
presentation or when a lecturer is speaking and there is very little motion. Bitrate is
often measured in kilobits per second (kbps).
To estimate the space you need for the recording, see Table 49: Typical file sizes
based on the bitrate on page 170. You can see how much recording time is available
on your target disk when you access the Recording menu (see User Guide for Avaya
Scopia
®
XT Series).
You cannot change the bitrate for meetings recorded to the network. If you selected
Automatic as the Location, this bitrate is applied only when recording to the USB
device.
Audio Alert When recording meetings to a local USB storage device, you can indicate to all
participants that the meeting is being recorded. Select Yes to enable an audio
message alert at the beginning of the videoconference. This alert is also sent to late
participants.
When recording meetings to the network, an alert is always sent to participants.
Ignore Mute on
Playback
Select Yes to send the audio to the connected remote side when viewing a recording,
even if the volume on the endpoint is muted. For more information about the sound
settings, see Adjusting the Default Volume Settings. For privacy, you can connect
headphones as described in Connecting Headphones to the.
Save to External
Server
Select Yes to enable saving of your files to an external FTP server.
External Server Type • Select AESR if you have deployed Avaya Equinox Management with Avaya
Equinox Streaming and Recording Server configured to accept file transfers.
• Select Generic if you want to transfer your file to a standard FTP server. In case of
a generic server, assure that Passive Transfer Mode is enabled on the server.
FTP Server URL Type a URL containing the name or the IP address of the FTP server and optionally
the port number (if different from the standard one, 21) and an existing subdirectory
path on the server where your files will be saved. For example:
[ftp://]servername_or_serveraddress[:port][/remotedir/.../]
FTP Server User Type the username to login into the FTP server.
FTP Server Password Type the password to login into the FTP server.
FTP Secure
Connection
Select Yes to ensure that the file transfer is secured using FTPS.
AESR File Owner Type the name of the file owner in Avaya Equinox Streaming and Recording Server. It
usually corresponds to a user defined in Avaya Equinox Management.
AESR Server Tenant
ID
Type the tenant or organization identification number for the file owner’s organization,
as defined in Avaya Equinox Management/Avaya Equinox Streaming and Recording
Server. If your deployment is not configured in multi-tenant mode, use 999.
Use the following table as a guide to determine the best bit rate to use, depending on the
resolution you require and your disk space constraints.
Enabling and Configuring Recording
January 2017 Avaya Scopia
®
XT Series Deployment Guide 169
Comments on this document? infodev@avaya.com
To Next Page
Loading...
