Figure 146: Establishing TLS connection
The following set of procedures secure the connection between XT Series and other devices.
Perform these tasks in the order listed below:
1. Create and upload the Equinox Management's certificate for videoconferencing components
as described in Administrator Guide for Equinox Management.
2. Perform
Generating a Certificate Signing Request for XT Series on page 205.
3. Perform Enabling the TLS Connection in XT Series on page 214.
4. If you used a different CA for XT Series from the one used for Equinox Management, upload
the XT Series's CA root and intermediate certificates into Equinox Management as described
in Administrator Guide for Equinox Management.
5. To encrypt the media (audio, video, presentation) of videoconferences using the SRTP
protocol, perform
Enabling Encryption for Videoconferences on page 216.
Related links
Securing your XT Series on page 198
Generating a Certificate Signing Request for XT Series on page 205
Uploading the CA root certificate that you receive from the CA on page 208
Backing Up and Restoring XT Series Certificates on page 211
Deleting XT Series Certificates on page 212
Enabling the TLS Connection in XT Series on page 214
Enabling Encryption for Videoconferences on page 216
Securing your XT Series
January 2017 Avaya Scopia
®
XT Series Deployment Guide 204
Comments on this document? infodev@avaya.com
To Next Page
Loading...
