wireless connection terminates if a user plug in a DVI cable. You can configure security settings for
wireless XT Series connections.
Procedure
1. Access the wireless settings. From the XT Series web interface, select Administrator
Settings > Utilities > Remote Access > Screen Link/Mobile Link. From the endpoint's
main menu, select Configure > Advanced > Utilities > Remote Access > Screen Link/
Mobile Link.
From the endpoint interface
From the web interface
Figure 163: Air Share Options
2. Define the Mode field.
Table 64: Securing Wireless Connections to the Computer
Field Name Description
Mode Disabled: Select to prevent the computer from connecting to XT Series
wirelessly.
Enabled – Ask PIN (manual pairing): Select to require users to enter a PIN
in order to display content on the XT Series. No PIN is required for acoustic
pairing. This is the default value.
Enabled – Ask PIN (always Acoustic Pairing and MANUAL): Select to
require users to always enter a PIN in order to display content on the XT
Series.
Enabled – no PIN: Select to enable the computer to connect to XT Series
wirelessly without entering a PIN.
Remote
Presentation Mode
Automatic: Select to start sharing a presentation in a call immediately.
Manual: Select to require users to click Present in order to start sharing a
presentation.
3. From the web interface only, click Save.
Related links
Securing your XT Series on page 198
Securing Wireless Connections to the Computer
January 2017 Avaya Scopia
®
XT Series Deployment Guide 219
Comments on this document? infodev@avaya.com
To Next Page
Loading...
