7. Get started with the basic configuration to use the XT Series, as described in Initial
Configuration of the XT Series on page 93, including running the quick setup wizard, and
defining network settings, if your XT is not autoprovisioned by Equinox Management.
8. (Recommended) You can prevent users from altering advanced settings by changing the
default administrator PIN code, and you can optionally set a user PIN code to protect basic
settings too (see
Setting PIN Codes for the XT Series on page 198).
To change the default login settings for the XT Series web interface, see
Securing Web
Access to the XT Series on page 199.
9. If your XT Series is an endpoint, not just a server, configure your camera and microphone
settings, as described in:
• Configuring Cameras on page 116
•
Configuring Microphones on page 120
10. If necessary for your deployment, configure your advanced network and call settings, as
described in Configuring Advanced Network Settings on page 132. This includes, for
example:
• Setting the IP address
• Configuring the system in a SIP deployment
• Configuring call settings
• Enabling NAT and Firewall Traversal
• Registering the system with the gatekeeper
• Configuring the system to use an LDAP directory
Note:
If your system is autoprovisioned by Equinox Management, you can skip these steps.
For more information about deployment setups, see Planning the Topology of the Avaya
Scopia
®
XT Series Deployment on page 27 and the Avaya Equinox Solution Guide.
11. (Optional) If necessary for your organization, you can secure videoconference sessions via
encrypted connections and TLS certificates (see Securing your XT Series on page 198).
Important:
Using encryption is subject to local regulation. In some countries it is restricted or limited
for usage. For more information, consult your local reseller.
12. If your deployment includes Equinox Management, you can set up remote monitoring and
management of the XT Series using cloud provisioning.
13. You can remotely backup and restore the XT Series configurations via Equinox
Management, as described in
Enabling System Logs and Remote Initialization on page 221,
or use the same configuration files to duplicate the same settings across multiple endpoints
in an organization.
January 2017 Avaya Scopia
®
XT Series Deployment Guide 25
Comments on this document? infodev@avaya.com
To Next Page
Loading...
