Important:
You can configure the base port to any value between 1024-65535. The number of ports
is calculated automatically by the system, and can be lower than the values specified
above, depending on whether you have an MCU license and its type.
4. From the web interface only, select Save.
Related links
Implementing Port Security for the Avaya Scopia
®
XT Series on page 32
Planning the Topology of the Avaya Scopia
®
XT Series Deployment
January 2017 Avaya Scopia
®
XT Series Deployment Guide 42
Comments on this document? infodev@avaya.com
To Next Page
Loading...
