Alternatively, if you want to route the audio to headphones, for example when using the XT
Executive, you can connect headphones to the monitor's audio port or the lower USB port so it cuts
off the monitor's speakers and routes sound to the headphones only.
Before you begin
If connecting an amplifier, verify you have a shielded stereo audio cable with a 3.5mm stereo audio
plug.
Procedure
1.
To boost sound, connect an amplifier with speakers directly to the audio output port
on
the XT Series.
Figure 36: Connecting external amplifier/speakers to the XT Series
2. To connect headphones to replace the monitor's speakers, connect headphones to the audio
output of the monitor.
Figure 37: Connecting headphones to the XT Series
Alternatively, attach a USB headset to the USB port on the XT Codec Unit (see Choosing a
Microphone for Your XT Series on page 61).
Setting Up the XT Series Hardware
January 2017 Avaya Scopia
®
XT Series Deployment Guide 66
Comments on this document? infodev@avaya.com
To Next Page
Loading...
