Figure 38: Connecting a computer's display to the XT Series
2.
Connect the computer audio to the audio-in port on the XT Codec Unit, which supports
both analog and digital optical audio.
Important:
By default, participants in the meeting can hear your computer’s audio even if you mute
the audio on the XT Series.
Figure 39: Connecting a computer's audio to the XT Series
When you connect a computer's audio output to the XT Series, the echo cancellation for this
analog input is disabled by default (see Configuring Microphones on page 120).
3. Set the computer's resolution by accessing the operating system graphics settings.
4. Select your screen resolution and refresh rates from the list of supported settings (see Table
9: Supported computer monitor resolutions and refresh rates on page 69).
Setting Up the XT Series Hardware
January 2017 Avaya Scopia
®
XT Series Deployment Guide 68
Comments on this document? infodev@avaya.com
To Next Page
Loading...
