7. In the Network page, go to “Firewall”.
8. Select “ON” in the NAT Configuration check
box and enter the IP address in the “NAT
Public (WAN) Address” field.
9. Press the “Home” button on the remote to
return the home menu.
10. Press the Call button on the remote
controller and you are ready to make your
first call.
H.460 Gatekeeper with Firewall Traversal
Your SVC system is connecting to the internet through a firewall and you have a Gatekeeper outside
the firewall.
SVC Firewall
Gatekeeper
Internet
1. From the remote press “Home” > >
“
Settings
”.
2. Press > “
Network
”.
3. Select “LAN Configuration”.
4. And In the drop-down list “IP Address Type”,
choose “Static IP”. Manually input the “IP
address”, “Subnet Mask” and “Default
Gateway”.
5. Select “
Apply
” and press (Enter).
To Next Page
Loading...
