AVer SVC100 - Advance Network

74
Advance Network
Configure 802.1x and VLAN settings.
Select
Network
│
Advance Network
and press
.
EAP 802.1x

Enable 802.1x:
Enable/disable 802.1x
protocol. IEEE 802.1X is an IEEE
Standard for port-based Network Access
Control (PNAC). It provides
an authentication mechanism to devices
wishing to attach to a LAN or WLAN
.

Identity
: Enter the ID for 802.1x
authentication.

Password
: Enter 802.1x’s authentication
password.
Click
Apply
to save and active the settings.
VLAN

Enable VLAN:
Enable/disable VLAN function.
A virtual LAN (VLAN) is any broadcast
domain that is partitioned and isolated in
a network at the data link layer.

VID
: Enter port for VLAN.

Priority
: Assign VLAN packet’s priority.
Click
Apply
to save and active the settings.