55
Monitor
SVC main system allows you to connect dual monitor. In the
Monitor
configuration screen, you can
configure the
Aspect Ratio
and
Screen Saver
to each monitor.
Select
General Setting
and press to select
Monitor
and press .
Select the Screen Saver time (OFF/10
Minutes/20Minutes/30Minutes/60Minutes) from
the drop-down list and press . You can
select
“OFF”
to disable this function or define a
standby mode time.
The screen will turn black when the system is in standby mode. Press any button on the remote
controller to wake up the system.
TV Underscan
For older type TVs/CRT monitors, this function
can help to auto adjust screen view when the
GUI is exceeded the monitor view range.
HDMI1 Compatible Offset Frame
To adjust screen position if the screen display is
not in center.
To Next Page
Loading...
