AVer SVC100 - Date and Time

56
Date and Time
Date and Time allows you to set the Date and Time formats, adjust the time setting and change the
time zones around the world and countries.
Date Format
Select
General Setting
and press to select
Date and Time
and press .
Select the Date Format (yyyy-mm-dd/
mm-dd-yyyy/dd-mm-yyyy) you prefer from the
drop-down list.
Time Format
Select
General Setting
and press to select
Date and Time
and press .
Select the Time Format (24-hour/12-hour) you
prefer from the drop-down list.
Enable NTP
Network Time Protocol (NTP) is a protocol that
is used to synchronize computer clock times in a
network of computers. Select the
Enable NTP
check box to make your main system time the
same as the network time.