AVer SVC100 - Aver Svc Wizard Setup; Start

18
AVer SVC Wizard Setup
For the first time using AVer SVC system, the Installation Wizard will guide the user to setup SVC
system step by step. After completing the wizard setup, user may start to use the SVC system.
In Installation Wizard, user can use the following buttons on remote controller to move between the
selections and make/confirm selection.
: To expand the drop-down list, make/confirm the selection.
/ : Move the cursor up or down.
: Move the cursor to right or on
Next
button.
: Move the cursor to left or on
Back
button.
Start
Please follow the below description to complete the wizard setup.
Connect your SVC system well and turn on the
power. After your SVC system starting, user will
see the Installation Wizard screen shown up.
If you want to pass the Wizard setup, press
button move to
Skip
button and press to go
to Home page.