The Settings allows you to modify system
setting, authority of administrator, monitor
setting, and adjust date and time.
Call Settings
Call Setting set the system to enable/disable auto answer, set the default call quality, and
enable/disable Advanced Encryption Standard which ciphers the data to protect against unauthorized
data access.
Auto Answer
Select
General Setting
and press to select
Call Settings
and press .
Select
Auto Answer
and press . In the Auto
Answer drop-down list, select
“OFF”
to turn off
Auto Answer.
“ON”
to answer the call
automatically and
“First Call Only”
to
automatically answer the first call and answer or
reject other incoming calls manually. “
First ON
with MIC Mute
” will automatically answer the
first coming call but local site is in mute status;
the caller site couldn’t hear any sound from local
site. “
Do Not Disturb
” will not answer any
coming call.
If you are already in a conference, even if the
Auto Answer is turned on, you also need to
accept the next call manually.
To Next Page
Loading...
