AVer SVC100 - Administrator

51
Administrator
Enable Web Admin
Select
General Setting
and press to select
Administrator
and press .
Here allows you to enable administrator authority
of Web Tool. When you access to Web Tool, a
password is required. The default password is
“1234”.
Enable Admin
Select
General Setting
and press to select
Administrator
and press .
Here allows you to enable authority of system
administrator. When you want to setup system,
a password is required. The default password is
“1234”.
To change password, select
Change Admin
Password
. Enter the admin password, then,
enter new password and confirm password,
select
OK
to change the password.