AVer SVC100 - Page 58

52
Change EZDraw Password
Select
General Setting
and press to select
Administrator
and press .
Here allows you to change password of
EZDraw.
EZDraw password is used when user use
EZDraw on tablet to connect to SVC system.
SVC system support up to 10 users to connect
to SVC system by EZDraw.
The default password is “1234”
Enable VCLine/ScreenShare
Select
General Setting
and press to select
Administrator
and press .
Here allows you to enable function of VCLink
and ScreenShare
Change VCLine/ScreenShare Password
Select
General Setting
and press to select
Administrator
and press .
Here allows you to change password of VCLink
and ScreenShare. The default password is
“1234”