AVer SVC100 - Hang up the Call

30
Call Quality
For the
Call Quality
selection, enter the desired
call quality (or network bandwidth) from the
drop-down list (default or 64K up to 4M bit per
second).
Select the
“Call”
on the Dial configuration
screen then press to make a call.
Make sure the network jack is plugged in and
network is working properly before making a call;
otherwise, the
“Network Jack Unplugged”
information will appear. Click
“OK”
to reconfirm
the network connection.
Hang up the call
1. When in multi-point call conference, press
button(Hang up) on remote control
and a call-point list screen is pop-up.
2. Use the ▲ and ▼ buttons to select which
you want to disconnect and press . To
end the meeting, select Disconnect All.
3. You will notice the site names in the
meeting are color coded. If you are not sure
of which name you want to disconnect, refer
to the color of the frame.
4. In multiple call conference, you can choose
to hang out which call.