AVer SVC100 - Firewall

75
Firewall
Configure the following items to setup the Firewall.
Select
Network
│
Firewall and press .
Configure the following relative items to setup
the Firewall.
TCP/UDP Ports
By default, the system communicates through
TCP/UDP ports in the range from 30000 to
30299. You can specify the range for your
specific network environment.

You must configure your firewall to allow inbound/outbound traffic through “UDP (port 1719)”/ “TCP
(port 1720)” for H.323 call setup.
Enable UPnP
Mark to enable UPnP function.