AVer SVC100 - Rtmp; Test Utilities

88
RTMP
Setup a live broadcast during the video conferencing to share the ongoing video conferencing.
Select
Network
│
RTMP
and press .
RTMP URL:
You can live broadcasting the live
video conferencing to live broadcast web site
such as Youtube. User needs to go to Youtube
to open a live broadcast and get the live
broadcast URL for upload video to.
RTMP Key:
Enter the stream key that you get
from Youtube.
RTMP Bitrate:
Select the upload stream
bandwidth.
Start:
starting to live broadcast.
Stop:
Select to stop live broadcasting.
After completing RTMP setting, go to home
page of SVC system and press “
Record
” button
on remote controller. Then, select “
RTMP Only
”
to start live broadcast. A RTMP icon will display
on screen to indicate RTMP function is enabled.
The far site can enter the live broadcast URL on
browser to view the live video of conference
meeting. The live broadcast URL can find on the
YouTube live broadcast setup page.
Test Utilities
Network Test
This feature tests the network ability between local and far site.
Select
Network
│
Test Utilities
and press .
Select
Run
to start testing.
Wait until it finishes the network test. The check
mark will appear if the network test is successful.
If it fails, save the report in a USB flash drive and
contact our technical support.