AVer SVC100 - Page 13

7
(2)
(3)
(6)
(7)
(9)
(10)
(12)
(16)
(14)
(19)
(20)
(4)
(5)
(8)
(11)
(15)
(17)
(18)
(13)
(1)
Name
Function
(9) Layout
- Press to change the screen layout.
- Press and hold can switch to dual screen
mode. This splits the video conferencing
screen and present screen onto two
separate monitors (two monitors must be
connected to use the feature, one through
HDMI-1 and one through HDMI-2).
(10) Presentation
Share the content that comes from either the
HDMI input source or the DVI/VGA input
source. The present icon will appear on the
screen when the presentation function is
enabled. The icon will disappear after 5 sec.
While video call, press presentation button
can select presentation source.
(11) Vol +
Increase the speaker volume.
(12) Zoom +
Increase the camera zoom or the captured
image magnifications.
(13) Enter
- Make a selection in OSD menus.
- Accept incoming calls.
- Display the site name and icon during the
meeting.
- Auto Focus function(PTZ camera only)
(14) Navigation
Buttons
( , , , )
- Use these buttons to navigate through the
selections in OSD menus or on-screen
keyboard.
- Pan and tilt the camera to adjust the
viewing.
- Pan, tilt the zoomed in camera image or
captured image.
(15) Vol -
Decrease the speaker volume.
(16) Zoom -
Decrease the camera zoom or the captured
image magnifications.
(17) Record/RTMP
- Press to select video recording / RTMP
function.
- While using EZDraw, press and hold can
share EZDraw screen view on SVC screen
view.