Static IP:
Configure the system to use the assigned IP address. Select this when the public IP
address is available.
Enter the following information and click
Apply
to save the settings. To go to next step, click
Next
and click
Back
to go back to
Network Setting page.
1.
Your IP Address is:
Enter your IP address
manually.
2.
Subnet Mask:
Enter the subnet mask
address when the system does not
automatically obtain the subnet mask
3.
Default Gateway:
A gateway is a network
point that acts as an entrance to another
network. Enter the gateway address when the
system does not automatically obtain the
gateway.
4.
Preferred DNS Server:
Domain Name
System (DNS) servers convert human
friendly names (for example:
www.example.com) to IP addresses
(218.77.272.166) that let machines be found
on the network. The preferred DNS server is
the one your computer asks first. The
alternate is a backup. Enter the Preferred and
Alternated DNS Server address.
5.
Alternate DNS Server:
Enter another
Domain Name server for second choice.
IPv6:
IPv6 is an evolutionary upgrade to the Internet Protocol. IPv6 will coexist with the older IPv4
for some time. IPv6 addresses are 128-bit IP address written in hexadecimal and separated by
colons.
Select and enter the following information and click
Apply
to save the settings. To go to next step,
click
Next
option and click
Back
to go back to
Network Setting
step.
1.
IP Address Type:
(1) Static IP:
Configure the system to use
the assigned IP address. Select this
when the public IP address is available.
(2) Auto:
Obtain the dynamic IP address
automatically. User needs to enter the
IP address and prefix length in
following.
2.
Your IP Address is:
Enter your IP address
manually.
3.
Prefix Length:
Prefix Length allows you to
place as many IPv6 devices as the underlying
network medium allows.
To Next Page
Loading...
