44
[Note] When Multi-Presenter Detection is enabled, only when the presenters appear within the
current camera view will be detected, and the Multi-Presenter Detection will be triggered.
For example, when there is one presenter detected, the camera will perform single-presenter tracking,
in which the camera view will focus on the presenter.
Meanwhile, when there is another presenter appears within the current camera view and then
detected by the camera, the camera will be triggered to the pre-configured preset position.
Multi-Presenter Detection will be triggered
Multi-Presenter Detection will not be triggered
Current Camera ViewPreset Position bundled with
Multi-Presenter Detection
Current Camera ViewPreset Position bundled with
Multi-Presenter Detection
To Next Page
Loading...
