35146AJ
39
CUSTOMIZING THE LIVE SCREEN
How Do I Add / Remove Cameras from The
Live Screen Display?
Add Camera
1. Click and drag a camera from the Camera List to the Viewing
Pane to create a Camera Tile.
Note: Change the Live screen grid if more camera channels are
desired.
—OR—
2. Click the desired camera on the Camera List to automatically add
it to the Viewing Pane in an available camera tile. Each
subsequent camera clicked will be added to the next available
camera tile.
—OR—
3. Drag one camera tile over in the Viewing Pane to swap their
locations.
Remove Camera
1. Right-click in the desired camera tile to display the right-click
menu, and then click Remove or Remove All.
—OR—
2. Move the mouse to the top of the camera tile to display the tile
toolbar, and then click the red ‘X.’
How Do I Adjust the Grid of Camera Tiles in
The Viewing Pane?
The Live screen display can be adjusted to show live video for 1, 4, 9, or
16 camera tiles.
1. In the Live screen, click Grid.
2. Click on the desired screen grid. The screen grid will automatically
apply.
3. Adjust the camera tiles to display the desired cameras.
How Do I Adjust the Live Screen View?
The Live screen view affects the camera tiles and the aspect ratio /
format of the live video being displayed.
1. In the Live screen, click View.
2. Click the desired view. The Live Screen view will automatically
apply.
Note Choose from aspect ratios of 4:3 or 16:9, and choose a format
of Stretch or Original.
How do I Adjust the Live Video Stream
Quality?
The Stream Quality option affects the resolution of live video as seen on
the Live Screen. The stream resolution can be set to low, medium, high,
or automatic.
1. In the Live screen, click Stream.
2. Click the desired streaming resolution (Low, Medium, High, or
Auto). The Live Screen will automatically adjust.
Note The available streaming resolutions are dependent on camera
setup.
To Next Page
Loading...