2 — Safety
Service Instructions RP-A301CE/RP-A351CE/RP-A355CE 2 - 3
2.1 RP-A301CE/A351CE
2.1.1 Electrical safety devices
The electrical safety devices in accordance
with the EN 60204 standards are:
• Start and stop pushbuttons.
• Control circuit provided with electric
servo-control; in the case of blade
clamping the machine must be re-
started manually.
• Device to stop the rotation of the
blade if the clamping handle of the
blade guard is released.
Note:
When the machine is not used:
• Make sure that it is off.
• Re-position the slice thickness control
to zero.
Do not remove the labels placed on the
machine. Only replace them if damaged.
V 230
To Next Page
Loading...