3 — Operation
3 - 26 Service Instructions RP-A301CE/RP-A351CE/RP-A355CE
3.1.9 Guides lubrication
This operation must be performed after
cleaning the slicer or whenever sliding is
difficult.
Use Berkel slicer oil.
Lubrication of the guide bar for
the last slice device
1. Drop some oil on the bar.
2. Let the last slice device slide on the
guide bar.
Lubrication of the guide bar for
the product holder carriage
1. Rotate the carriage release handle in
a clockwise direction by 180 (Manual
Operation).
2. Push the product holder towards the
operator.
3. Pour the lubricating oil into the special
carriage bar lubricator.
4. Push the product holder to and fro
and repeat the operation. Reposition
it towards the operator.
To Next Page
Loading...