3 — Operation
Service Instructions RP-A301CE/RP-A351CE/RP-A355CE 3 - 25
10. After sharpening press the stop
pushbutton .
11. Pull the handle to reposition the
sharpener to its initial position.
12. Lower the sharpener cover.
Cleaning of the grinding wheels
The grinding wheel and its pin are removed
from the sharpener by taking it off in the
direction of the arrow.
For satisfactory sharpening the grinding
wheel must always be clean.
Remove dirt and grease with alcohol and
the special brush supplied.
To Next Page
Loading...