3 — Operation
Service Instructions RP-A301CE/RP-A351CE/RP-A355CE 3 - 33
After cutting the product, re-position the
product holder towards the operator. By
pressing pushbutton the rotation of the
blade stops. Re-position the slice thickness
control to zero and unload the product.
Sharpening
If the product is not regularly cut the blade
must be sharpened following the
instructions indicated in 3.2.5.
3.2.4 Cleaning
The machine must be cleaned once a day or
more frequently if necessary.
Clean all the parts using a cloth sprinkled
with water and washing up liquid (do not use
strong detergents) and a brush.
DANGER:
DO NOT USE A WATER JET.
WARNING:
PERFORM THE CLEANING
OPERATIONS WITH GREAT CARE:
DANGER OF INJURY.
To Next Page
Loading...