Avery Berkel A301CE - Slicer Functioning and Use

3 — Operation
Service Instructions RP-A301CE/RP-A351CE/RP-A355CE 3 - 29
3.2.3 Slicer functioning and use
The following products can be sliced:
sausages, ham, cheese, bread. If large
quantities of bread or cheese are usually
cut, a teflon coating is recommended
(Optional accessory 97).
Note:
The following cannot be sliced:
• non-edible products.
• foodstuffs with bones.
• frozen products.
Automatic operation
1. Rotate the carriage release handle in
a counterclockwise direction by 180.
With the automatic operation it is
possible to change the cut stroke
length to adapt it to the dimensions of
the product to be cut.
2. Rotate the product holder stroke
adjustment knob respectively in a
clockwise or counter-clockwise
direction to lengthen or shorten the
product holder stroke. Irrespective of
the selected stroke, the product holder
always stops in product load position
(operator’s side) by pressing the
product holder stop pushbutton.
The sliding product holder proceeds
automatically towards the slice thickness
plate; the maximum cutting thickness is
10 mm. By rotating the slice thickness
control beyond position 10, the slicer cannot
work automatically.
The machine is supplied with two self-
contained motors: one for the blade and
another for the product holder to better
adjust its stroke.
By separating the two functions a more
precise cut can be obtained.