3 — Operation
Service Instructions RP-A301CE/RP-A351CE/RP-A355CE 3 - 13
7. Press pushbutton to start the
machine.
8. Seize the handle of the last slice
device. With a light pressure on
the goods towards the slice
thickness plate push the product
holder to the blade stroke end,
then return to the operator and
repeat the operation.
After cutting the product, re-position the
product holder towards the operator. By
pressing pushbutton the rotation of
the blade stops. Re-position the slice
thickness control to zero and unload the
product.
Sharpening
If the product is not regularly cut the
blade must be sharpened following the
instructions indicated in 3.1.7 and 3.1.8.
To Next Page
Loading...