3 — Operation
3 - 18 Service Instructions RP-A301CE/RP-A351CE/RP-A355CE
5. Lift the product holder from the
carriage.
Note:
The slice thickness control must be set at
zero.
Blade cover
1. Loosen the blade cover fastener
handle by rotating it in a
counterclockwise direction.
2. Push on the handle in the direction
indicated by the arrow to lift the blade
cover from the blade.
Blade cleaning
1. Lift the blade cover.
2. Press a damp cloth on the front side
of the blade and move slowly from
the center towards the edge in the
direction of the arrow.
3. Rotate the slice deflector and keep it
away from the blade.
To Next Page
Loading...