3 — Operation
Service Instructions RP-A301CE/RP-A351CE/RP-A355CE 3 - 31
6. Move the feed carriage near to the
slice thickness plate.
7. Rotate the slice thickness control to
the thickness desired.
Automatic operation
1. Rotate the carriage release handle in
a counterclockwise direction by 180.
2. Press pushbutton to start the
blade.
3. Press pushbutton to start the
product holder.
10. To select the most suitable carriage
stroke according to the dimensions of
the product to be cut, rotate the
carriage stroke adjustment knob
respectively in a clockwise or
counterclockwise direction to lengthen
or shorten the stroke.
To Next Page
Loading...