Classification: Avery Dennison – Public 14
The following settings can be configured using the Net Configuration Tool. For WLAN, there are other settings
beyond those listed below. Available WLAN settings may vary depending on the functions supported by the
printer's WLAN module.
Assignment
Method
Assign IP address manually or automatically through DHCP. If the
network does not support DHCP, you must assign the IP address
manually.
This information is required for LAN/WLAN communication and a
unique IP address must be entered. The communication port is set to
9100 by default. You have to change the port number via reference
below table to use another port.
3337, 9000
Management
UDP
Discovery/Setting
Port Number
Inactivity Time
If there is no communication between the host and printer during the
set period of time, the connection will be closed automatically. The
value can be set between 0 and 3600 seconds (1 hour). If set to 0, this
function is disabled.
System Name
A string that indicates the WLAN printer. A maximum of 64 characters
can be entered.
※ This string does not display on certain printers.
To Next Page
Loading...
