Avery Dennison 9444 - Page 25

Classification: Avery Dennison – Public 21
IP Address Configuration
Description
IP Address Assignment
Assign the IP address manually or automatically through
DHCP. If the network does not support DHCP, you have to
assign IP address manually.
IP Address
This information is required for LAN/WLAN communication
and unique IP address must be entered. The
communication port is set to 9100 by default. You have to
change the port number via reference below table to use
another port.
Port Number
Description
TCP/UDP
Notes
9100, 6101,
9300
Printing TCP Used for printing
80
HTTP
TCP
Web page
3337, 9000
Device
Management
UDP
Bixolon Device
Discovery/Setting
Subnet mask
Gateway
Port Number
System Configuration
Description
System Name
This string indicates the WLAN printer. A maximum of 64
characters can be entered.
※ This string may not be shown in certain printers.
User ID
User ID and Password are used to access a printer from a web
browser. A maximum of 32 characters can be entered.
User Password
Inactivity Time
If there is no communication between the host and printer
during the set period of time, the connection will be closed
automatically. The value can be set between 0 and 3600
seconds (1 hour) by a unit of second. If set to 0, this function
is disabled.
Wireless Frequency
2.4GHz
2.4GHz is used for frequency.
5.0GHz
5.0GHz is used for frequency.
2.4GHz/5.0GHz
(Priority: 2.4GHz)
Both 2.4GHz/5.0GHz are used.
(2.4GHz has a higher priority.)
2.4GHz/5.0GHz
(Priority: 5.0GHz)
Both 2.4GHz/5.0GHz are used.
(5.0GHz has a higher priority.)
※ You may not be able to choose frequency in certain
printers.