031 Human readable option must be
0 default
1 no CD or NS
5 NS at bottom, no CD
6 CD at bottom, no NS
7 CD and NS at bottom
8 no text
032 Bar code type is invalid. See “Defining Bar Code Fields” in Chapter 3 for valid
options.
033 Bar code density is invalid. See “Defining Bar Code Fields” in Chapter 3 for the bar
code density chart.
040
Line thickness must be 0 to 99 dots.
041
Line direction must be 0, 90, 180, or 270.
042 End row is invalid. Line segment or box end row is defined outside of printable area.
043 End column is invalid. Line segment or box end column is defined outside of printable
area.
044 Dot pattern for line or box must be “”.
045 Line length is defined beyond the maximum length. See “Defining Line Fields” in
Chapter 3 for valid lengths.
046
Line type must be S (segment) or V (vector).
051
Imaging mode in the graphic header must be 0.
Batch Errors
Error
Code
Description
101 The format referenced by batch is not in memory.
102
Print quantity is outside the range 0 to 32,000.
104
Batch mode must be N (new) or U (update).
105
Batch separator in a batch control field must be 0 (Off).
106
Print multiple is outside the range 1 to 32,000.
107
Cut multiple is outside the range 0 to 999. Only valid for printers with a knife.
108
Multiple part supply is outside the range 1 to 5.
109
Cut type is outside the range 0 to 5. Only valid for printers with a knife.
8-6 DIAGNOSTICS AND ERRORS
To Next Page
Loading...
