What to do if my Avery Dennison MONARCH 9416 XL indicator light is green but it will not print?
If the indicator light on your Avery Dennison Printer is green but it won't print, check the cable connections from the computer to the printer. Also, verify that the supply is loaded correctly, and clean the printhead. Make sure the cover is completely closed.
Why does the supply exit partially or skip on my Avery Dennison Printer?
If the supply exits partially out of the Avery Dennison printer or skips, it might be caught in the printer. Also, make sure that you verify the supply is loaded correctly.
How to fix Avery Dennison Printer when the indicator light is off?
If the indicator light is off when your Avery Dennison Printer is turned on, check the power connections from the power supply to the printer and the AC outlet.
General| Print Resolution | 203 dpi |
|---|---|
| Print Speed | 4 ips |
| Connectivity | Serial, Parallel, USB |
| Power Requirements | 100-240 VAC, 50-60 Hz |
| Print Technology | Direct Thermal |
| Maximum Print Width | 4.1 inches |
| Media Type | Labels, Tags |
| Media Width | 1 inch to 4.25 inches |
| Media Thickness | 0.0025 inches to 0.01 inches |
| Operating Temperature | 41°F to 104°F (5°C to 40°C) |
| Humidity | 20% to 85% non-condensing |
Describes the keyboard's potential for five preset label formats with varying dimensions.
Details the expected contents of the kit and advises on keeping packaging for potential returns or repairs.
Provides step-by-step instructions for connecting the keyboard to the printer using serial and power cables.
Explains the layout and functions of the keyboard, including alphabetic, numeric, function, and special keys.
Guides users on configuring the printer's sensor for black mark or die-cut label supplies.
Explains how to select between 'Peel' mode for backing separation and 'No Peel' for continuous strips.
Instructs on configuring the printer for ribbon usage, distinguishing between thermal direct and thermal transfer supplies.
Details the process of sending updated printer settings (supply type, feed mode, ribbon) to the device.
Instructions for loading 1.2"x1.1" supply and entering data for Line 1-4 and print quantity.
Instructions for loading 1.2"x1.1" supply and entering data for UPCA Barcode and print quantity.
Instructions for loading 1.2"x1.1" supply and entering data for Line 1, UPCA Barcode, Line 2, and print quantity.
Instructions for loading 1.5"x2.7" supply and entering data for Lines 1-5, UPC Barcode, and print quantity.
Instructions for loading 1.5"x2.7" supply and entering data for Lines 1-6, and print quantity.
Explains how to access version or copyright information using the 'Form' or 'Exit' keys.
To Next Page
