Getting Started 1-1
GETTING STARTED
The Avery Dennison® Monarch® 9419 Printer prints on thermal transfer (ribbon) and
thermal direct labels or tags. The printer prints labels continuously (in one strip) or on-
demand (one label at a time). You can print on die cut, black mark, or continuous (non-
indexed) supplies.
The printer operates in either online or offline mode:
Online Mode Use online mode when the printer receives print data from a
connected host (PC or network).
Offline Mode Use offline mode (stand-alone mode) when the printer receives data
from a keyboard or scanner. The printer is not connected to a host.
The printer comes pre-loaded with eleven standard formats.
Custom offline formats can be loaded. To use the pre-loaded
formats, refer to the Offline Mode System Administrator’s Guide.
This chapter explains how to:
♦ connect the power cord and communication cable.
♦ use the printer's control panel.
A power cord, ribbon take-up core, two ribbon reels, and a USB cable are included. Keep
the box and packaging material in case the printer ever needs repair.
Note: Review the Safety Document included with your printer and the Regulatory
information found on our Web site.
Audience
This Equipment Manual is for the person who prints and applies labels.
For advanced printer setup, printer configuration, or using the Printer Management Utility,
refer to the System Administrator’s Guide for your selected operating mode (online or
offline).
To Next Page
Loading...
