Avid Technology HD I/O User Manual

Chapter 4: Configuring Pro Tools | HD I/O in Pro Tools | HD Software 21
Chapter 4: Configuring Pro Tools | HD I/O in
Pro Tools | HD Software
This chapter explains how to configure
Pro Tools | HD Software for use with
Pro Tools | HD I/O.
Hardware Setup
In the Hardware Setup dialog, Pro Tools lets you
set the default sample rate (if no session is open)
and clock source for your system, and provides ac-
cess to a range of controls specific to each type of
audio interface.
Default Sample Rate
The Sample Rate setting appears as the default
sample rate when you create a new session. (This
setting is available in the Hardware Setup dialog
only when no session is open.)
To change the default Sample Rate for new
sessions:
1 If a Pro Tools session is currently open, close it.
2 Choose Setup > Hardware .
3 From the Sample Rate pop-up menu, select the
sample rate that you want.
4 Click OK .
For more information about configuring
Pro Tools, see the Pro Tools Reference
Guide .
You can change the sample rate when
creating a new Pro Tools session by
selecting a different sample rate in the
New Session dialog.
Selecting the default sample rate

Avid Technology HD I/O Specifications

General

Brand	Avid Technology
Model	HD I/O
Category	Accessories
Language	English