Avigilon 2.0C-H5A-IRPTZ-DP40-WP User Manual

6. Remove the I/O cover and feed the I/O connector cable through the gland cap, cable gland, and I/O
cover. The I/O cable gland has a plug in it that must be pulled out before feeding the cable through.
7. Tighten the cable glands around the cables.
8. Connect power and I/O to the camera, then tighten the I/O cover.
9. Connect a network cable to the Ethernet port (RJ-45 connector).
The Link LED indicator will turn on once a network link has been established.
Connecting Cables 13

Avigilon 2.0C-H5A-IRPTZ-DP40-WP Specifications

General

Brand	Avigilon
Model	2.0C-H5A-IRPTZ-DP40-WP
Category	Security Camera
Language	English