3. Use the T20 star key to tighten the screws in the mount adapter.
Figure 5: Securing the camera to the wall mount adapter. Figure 6: Securing the camera to the NPT adapter.
4. If you are installing the camera to an NPT mount, make sure the mount adapter is secured then tighten
the lock nut to fix the camera to its final position.
(Optional) Configuring Onboard Storage
To use the camera's microSD card storage feature, you must insert a microSD card into the card slot.
It is recommended that the microSD card have a capacity of 64 GB or more, and a write speed of class 10 or
better. If the SD card does not meet the recommended capacity or write speed, the recording performance
may suffer and result in the loss of frames or footage.
(Optional) Configuring Onboard Storage 15
To Next Page
Loading...
Need help?
General
